AirFlow - package sewage treatment plants for residential applications

For 1-5 domestic dwellings without access to mains drainage, the AirFlow provides a reliable, efficient and environmentally safe solution to your sewage disposal needs. It is ideal for locations where discharge is to sub-surface irrigation, or to a suitable water course where approved by the Environment Agency, or appropriate regulating body and where a septic tank will not meet the required standards.

Application:
  • Individual houses.
  • Small developments.
  • Offices and commercial properties.
  • Upgrading existing septic tanks.
AirFlow package sewage treatment plants are available in a range extending from a single house to a population equivalent of 375 persons.

Applications for populations in excess of 375 are also catered for. For more information contact Titan Eko Sales.

Features:
  • Below ground installation.
  • No mechanical or electrical components within the plant.
  • Single tank unit delivered direct to site.
  • Quiet in operation.
  • Low running costs.
  • Deep inverts available on request.
  • Hydraulic surge control.
  • Comprehensive after sales service.
  • Manufactured under the quality procedures of BS ISO 9001: 2000 and norm PN EN 12566-3.
  • Low visual impact pedestrian covers.
Design:
The AirFlow sewage treatment plant employs the well proven aerobic biological process for the treatment of sewage. Three process stages take place within the single tank.
  • Coarse solids are separated and retained for gradual breakdown.
  • The separated liquor is continuously distributed over specialist media (which develop bacteria) by an airlift operated by a remotely sited blower.
  • Final settlement of solids takes place. With normal domestic sewage a discharge of 20mg/l, 30mg/l, 20mg/l ammonia can be achieved.
Dispersal
Subject to the relevant authorities consent, the plant discharge can be to a watercourse or to a designed infiltration system, provided the soil percolation test is satisfactory, to a ground soak away.

Options
  • Integral Pumpsets - for lifting treated effluent to a level where discharge cannot be by gravity.
  • Separate Sample Chambers - for accurate and convenient effluent sampling, as required by the relevant authorities.
Installation
The unit is normally installed with the cover flush to ground level. It may protrude above ground if required to suit ground levels or landscaping. Sitting should preferably be no closer than 7m from the nearest house. The plant should be seated on a concrete base within a concrete surround in either a dry or a wet site. The blower housing can be located anywhere within a 13m. radius of the plant itself.

Maintenance
AirFlow sewage treatment plant is designed for minimum maintenance.

Under normal usage the plant will require periodic emptying.

Files to download

AirFlow leaflet 363.53 KB File pdf
Order form 62.5 KB File doc